Acme United NI-51 Manuel d'utilisateur télécharger pdf (Page 5)

Installation

1. Be sure that all components are switched o before connecting.

2. Insert the signal cable jack into the sound output port of your PC, MP3 player, or other

equipment.

3. Plug the AC cable into a power socket.

4. Turn the “Volume” setting to minimum and then switch on the speaker system by pressing the

“POWER” button, after which the LED lights will activate.

5. Adjust the volume knob to the desired volume level.

Important safety instructions

1. For the best results, place your speakers on a solid, at surface when in use.

2. Do not touch the metallic parts of your connector cables.

3. When unplugging your speakers from an AC power socket, do not disconnect them by tugging

on the AC power cable; instead, pull carefully on the rubberised section of the plug.

4. In order to avoid potential electric shocks or other such accidents, do not dismantle or take apart

your speakers or their components.

5. Keep the volume turned down to the lowest setting before powering on your speakers. Once

they have power, proceed to raise the volume to a reasonable level.

6. Do not expose your speakers to excessive amounts of heat or cold. Keep them in a well

ventilated area to prevent any possible overheating.

7. Turn o the power to your speakers when they are not in use.

8. Do not spill liquids or uids onto your speakers. Make sure they stay dry at all times.

9. When connecting an audio device to your speakers, make sure that the volume setting on the

audio device is not set too high in order to avoid excessive signal input.

1 2 3 4 5 6 7 8 9 10 ... 51 52

Pas de commentaire

Acme United NI-51 Manuel d'utilisateur Page 5